Mazda 626 inspection plan

For tomorrow's class, this is the to-do list in order of priority. There's no way I'll get all these things done, but the list will help me focus.


1. Jack up engine and inspect crack in top engine mount (passenger side)
2. Inspect driver side upper engine mount, below the ignition coil.
3. Inspect driver side inner cv joint to see if there's fresh grease.
4. Cooling system pressure test
5. starter voltage drop test
6. alternator wire resistance or voltage drop test
7. Ignition coil test
8. Measure spark plug wire resistance
9. Cap and rotor inspection
10. Adjust tire pressures
11. Find jumper location to do measure timing


I also ordered the replacement shifter bushing from Jerry on Ebay.

edited 11/1/06